Engine
-
Total Power
-
Engine Hours
-
Class
Saltwater Fishing
Length
74ft
Year
2025
Model
75 Expedition Yachtfisher
Capacity
-
Boat Details
Description
Nordhavn has taken what it does best, building long-range luxury expedition yachts, and incorporated all the fishing features and rigging found on tournament sportfishers to create a yacht that can truly go after any fish in the world. An enormous fishing cockpit, dual 60-gallon baitwells, a 35-cubic-foot deep freeze, plentiful gear and tackle storage and all the rod holders and rigging a deep-sea angler could ever want top a long list of fishing features.
The N75 EYF is safer in rough weather when sea conditions force a slower running speed, which is always a major downside to the typical small rudders found on sportfishers (the N75 EYF’s standard stabilizers also promise a comfortable ride in rough seas). Additionally, the EYF’s 22 -foot four-inch beam permits a new Nordhavn standard feature: twin engines. A single screw is not an option. The N75 EYF sports Detroit Series 60 diesels and a cruising-speed fuel burn of 12 to 15 gallons per hour – a trickle compared to a typical sportfisher built for nothing but speed with noisy behemoth diesels guzzling 100 to 200 gallons or more per hour.
Another heavy advantage over typical sportfishers is there is no weight penalty for all the equipment and furnishings that make life grand. Dive equipment, jet skis, granite countertops, you name it – the N75 EYF’s full displacement hull allows you to load up with everything you need for fishing adventures that last for months, not hours. Like all Nordhavn yachts, the N75 EYF is a truly semi-custom boat. The interior can be designed to match an owner’s tastes and lifestyle.
About Nordhavn
Measurements
Dimensions
Nominal Length:74.42ft
Max Draft:7.5ft
Beam:22.33ft
Length at Waterline:66.67ft
Weights
Dry Weight:260,000Lb
Tanks
Fresh Water Tanks:600gal
Fuel Tanks:4540gal
Holding Tanks:240gal
More Details
General
- Cushions throughout boat per drawing with buyer’s choice of Ultraleather or fabric of equal value to Ultraleather
- Interior steps to all teak. Corner of steps to have non-skid varnish
- Interior lockers and drawers to be locking Timage with chrome push button
- Interior overhead panels – Majilite, “Nova Suede” #T3D4 Champagne . Removable, held in place by Velcro
- Interior door lock sets to be Mobella “Mc Coy” chrome finish
- Interior cabin doors to be 1-1/4″ (3.2 cm) thick and have rubber gaskets for sound reduction and door hooks
- Hanging lockers to have automatic interior lights controlled by micro switch. Lined with Japanese cedar
- Solid (non louvered) cored doors for heads and staterooms 1-1/4″ (3.2 cm) thick with rubber gaskets on door jambs
- Interior teak woodwork including cabin sole in pilot house to be varnished with 60% gloss varnish
- Salon tables, pilothouse table to be varnished with high gloss varnish
- All hand rails to be teak.
- Structural bulkheads dividing staterooms and heads to have 3/4” (1.9 cm) furring strips on each side to allow application of 3/4” (1.9 cm) thick sound insulation. The finished bulkhead material of 3/8” (9.5 mm) thickness to be applied over this
- Mirrors are located thru out vessel as shown on interior drawings
- All drawers to have sliders
Galley
- Sub Zero #736TCIL refrigerator/freezer with teak panels. Left hand hinge
- Counter top: Granite w/ bull nosed edges
- Flooring: Ceramic tile or stone
- Cabinet paneling: All teak
- G.E. Profile Stainless steel drop in electric range #JD968SFSS with custom stainless steel sea rails and pot holders
- Locker and drawer interior finish: Formica
- GE “Advantium” #SCA1001DSS microwave oven with exhaust blower
- GE Profile #GCG1540FSS 15″ (38.1 cm) stainless steel trash compactor
- Dishwasher 24″ (61 cm) Bosch #SHV6803 stainless steel
- Garbage disposal Insinkerator 3/4 hp #444SS
- Stove alcove to be lined with fire retardant material
Main Salon
- Floors: Carpet with 2 lb./sq.ft 1/2″ (1.27 cm) thick Soundown underlayment pad
- Cabinet/paneling: Varnished teak
- Teak coffee table on port side
- Furniture made by Jeddy’s Interiors: One (1) “L” shaped sofa and one (1) ottoman
- Locker interior finish: Teak
- Three (3) South Coast Marine Bar stools – stainless steel with cushion
- Aritex lift for 42″ (106.7 cm) flat screen TV on starboard side of salon (TV not included)
- Teak valance/air con soffit port and starboard and aft sides of salon
- Two overhead teak hand rails
- Custom glass and teak fishing rod storage locker forward starboard. With book shelves outboard
- “U” shaped dinette on starboard side with high gloss teak table
- Mullions along port and starboard side for installation of widow treatments
Day Head
- Floors: FRP
- Counter top: Granite with bull nosed edge
- Mirror and hand towel bar as shown on drawing
- Cabinet/joiner work: FRP
- Locker and drawer interior finish: Formica
- Toilet paper holder
Master Cabin
- Floors: Carpet with 2 lb./sq. ft. 1/2″ (1.27 cm) thick Soundown underlayment pad
- Cabinet/paneling: Varnished teak
- Hanging locker interior finish: Cedar wood
- Alcove for flat screen 42″ (106.7 cm) TV forward centerline (TV not included)
- Vanity/desk with chair
- Lounge area with custom sofa and book shelves outboard
- Mattress: Custom king size
- Hanging lockers to be Japanese cedar lined with full length mirrors on inside of doors
- Night stands next to bunk
- Teak headboard frame
Master Head
- Floors: Ceramic or stone tile to be specified with order
- Counter top: Granite with bull nosed edges
- Mirrors and towel bars: As shown on drawings
- Molded FRP shower stall with glass shower door.
- Cabinet/joiner work: All teak
- Locker and drawer interior finish: Formica
- Toilet paper holders and towel bars: Grohe
- Shower to have glass door
Pilothouse
- Floors: Teak – varnish
- Cabinet/joiner work: Varnished teak
- Countertops and instrument panel faces: Formica #939 black
- Teak table at settee.
- Settee with chart drawer under
- Helm seat – two (2) Stidds 500N-2X2 Low Back “Slimline”. Vinyl and pedestal color are buyer’s choice
- Locker interior finish: Formica
- Book shelves and chart drawers and lockers as shown on PAE drawing
- Drinks refrigerator under dash Model – Cruise 85
- Compass – Ritchie SS 5000 5″ (12.7 cm) mounted on teak block
- Top of instrument console to be wrapped in black leather or Ultraleather
Pilothouse Head
- Floors: Teak – varnished
- Cabinet/joiner work: All teak
- Toilet paper holder: Grohe
- Countertops: Granite with bull nosed edges
- Locker interior finish: Formica
- Towel bars: Grohe
- FRP shower stall with aluminum and glass bi-fold door
Port Guest Cabin
- Floors: Carpet with 2 lb./sq. ft. 1/2″ (1.27 cm) thick Soundown underlayment pad
- Cabinet/paneling: Varnished teak
- Hanging locker interior finish: Japanese cedar wood
- Dresser
- Drawers under bunk
- Mattress: Twin size x two (2)
- Night stand between bunks
- Teak headboard frames
- Lockers and book shelf over head of bunks
- Pipe berth outboard
- Forced air ventilation system with adjustable blower per PAE design
Starboard Guest Cabin
- Floors: Carpet with 2 lb./sq. ft. 1/2″ (1.27) thick Soundown underlayment pad
- Cabinet/paneling: Varnished teak
- Teak headboard frame
- Hanging locker with Japanese cedar wood lining x two (2)
- Drawers under berths
- Mattresses: Queen size 5″ (12.7 cm) thick foam
- Forced air ventilation system with adjustable blower per PAE design
- Pipe berth outboard